Honda VTX1800C/ J Left/ Ringht Floor Board Assembly Instruction Manual
download Left Side 1. Unplug the horn wires. 2. Unbolt the left side foot peg bracket assembly and save the hardware, the stock bolts will be used to install your new Cobra floorboards. 3. Remove horn...
View ArticleHonda VTX1800F Left/ Right Floor Board Assembly Installation Manual
download 1. Unplug the horn wires. 2. Unbolt the left side foot peg bracket assembly and save the hardware, the stock bolts will be used to install your new Cobra floorboards. 3. Remove horn and the...
View ArticleHONDA VTX1300 "C" MODEL HANDLEBAR RISERS INSTALLATION INSTRUCTIONS
download 1. Lay a blanket folded several times over the fuel tank to protect it. 2. Remove from underneath, the two hex nuts holding the handlebars to the upper triple clamp. (Steering head) Remove...
View ArticleHONDA VTX1300, VTX1800 R, C & S MODEL HANDLEBAR RISERS INSTALLATION INSTRUCTIONS
download 1 .Lay a blanket folded several times over the fuel tank to protect it. 2. Notice on the 1800 models that there is a small punch mark on the handlebars located on the right hand, front side of...
View ArticleHARLEY DAVIDSON STAINLESS STEEL SPLASHGUARD INSTALLATION INSTRUCTIONS
1. Refer to the appropriate Service Manual and remove the Maxi® fuse. 2. Refer to the applicable Service Manual and remove the rear wheel. 3. See Figure 1. Remove one screw (1) and stock splash- guard...
View ArticleHARLEY DAVIDSON CHROME SADDLEBAG LID TRIM KIT INSTALLATION INSTRUCTIONS
download INSTALLATION 1. Remove all articles from inside, then thoroughly wash and dry the saddlebag lid. 2. Close the saddlebag lid. Cut a piece of masking tape at least 10 inches (25 cm) long and lay...
View ArticleHARLEY DAVIDSON FLHR/ FLHP WINDSHIELD KITS INSTALLATION INSTRUCTIONS
download INSTALLATION 1. Remove stock windshield. 2. Remove all hardware that secures the mounting brackets to the windshield. The nine screws that must be removed require a T-27 TORX® screwdriver....
View ArticleHARLEY DAVIDSON SOFTAIL DETACHABLE WINDSHIELD INSTALLATION INSTRUCTIONS
download INSTALLATION NOTES To prevent scratches, cover the headlamp and the front of the fuel tank with a clean cloth and be sure the windshield assembly does not contact chrome or painted parts when...
View ArticleHARLEY DAVIDSON SOFTAIL CHROME LOWER BELT GUARD INSTALLATION MANUAL
download REMOVING STOCK PLASTIC LOWER BELT GUARD 1. See Figure 1. Remove the hex head bolt (2), washer (3), acorn nut (5), hex head screw (4) and acorn bolt (8) attaching plastic belt guard to rear...
View ArticleKAWASAKI VULCAN 900 SLASH CUT STAGGEREDS INSTALLATION MANUAL
download 1. Attach mounting bracket 440-P to frame using two stock fl ange head bolts used on stock upper bracket (Figures 1 and 2). 2. Remove head pipes and heat shields from protective packaging....
View Article